Downloads & Datasheets
Product Datasheets are now available to download from Shielding Solutions Limited.
Listed below are a selection of commonly requested data sheets for our products. If you do not see the Data sheet for the specific product you are interested in, please contact us and we will send the information you require via email.
If you wish to download the datasheet to your computer, please Right click on the image and select 'Save Target As...' option.
Form in Place Datasheets
 |
CEP SC001 is an electrically conductive composite material comprising of silicone elastomer and silver-plated copper particles. |
|
|
CEP SC002 is a softer electrically conductive composite material comprising of silicone elastomer and silver-plated copper particles. |
|
|
CEP NC001 is an electrically conductive composite material comprising of silicone elastomer and nickel-plated graphite particles. |
|
|
CEP SA001 is an electrically conductive composite material comprising of silicone elastomer and silver-plated aluminium particles. |
|
|
CEP SN001 is an electrically conductive composite material comprising of silicone elastomer and silver-plated nickel particles. |
|
|
SIL PS001 is a room temperature vulcanising (RTV) or curing silicone elastomer. When designed in correctly it provides a reusable environmental seal that is suitable for applications up to IP68 (water immersion). |
Conductive Adhesive Datasheets
|
|
ECA SE002 is a two component electrically conductive adhesive comprising of a modified epoxy resin filled with conductive silver particles. |
|
|
ECA CS 001 is a single component electrically conductive adhesive comprising of silicone resin filled with conductive carbon particles. |
|
|
ECA NCS001 is a single component electrically conductive adhesive comprising of silicone resin filled with conductive nickel coated graphite particles. |
|
|
ECA SAS001 is a single component electrically conductive adhesive comprising of silicone resin filled with conductive silver-plated aluminium particles. |
|
|
ECA SCS001 is a single component electrically conductive adhesive comprising of silicone resin filled with conductive silver-plated copper particles. |
Conductive Elastomer Datasheets
|
|
CEE SA001 is an electrically conductive composite material comprising of silicone elastomer and silver-plated aluminium particles. This is ideally suited for extruded sections and gaskets. |
|
|
CEM FSA001 is an electrically conductive composite material comprising of fluorosilicone elastomer and silver-plated aluminium particles. This provides excellent resistance to fuels and oils. |
Orientated Wire Material Datasheets
|
|
OWG-SM001 and OWG-SA001 are EMI gasket materials comprising of an array of orientated wires bonded into a silicone elastomer sheet. |
Conductive Foam Datasheets
|
|
MCF NCP001 is a gasket material comprising of a nickel over copper plated polyurethane foam. This material offers a combination of good conductivity in three axes with low compression force. |
Shielded Window Datasheets
|
|
SHW-CF100-100 is an electrically conductive optical film with excellent light transmission. |
Embedded Wire Gasket Datasheets
|
|
IWG AN001 is awoven aluminium cloth infilled or ‘over’ moulded with a synthetic elastomer. The elastomer used is resistant to hot lubricating oils and meets or exceeds the requirements of AMS 3222c. |
Electrically Conductive Tape Datasheets
|
|
ECT ASMR001 is a conductive adhesive transfer tape that combines both conductive pressure sensitive silicone and acrylic adhesives on opposite sides of a conductive woven mesh interlayer. |
|
|
ECT CNFR001 is a nickel over copper plated PET based rip-stop fabric tape with a pressure sensitive conductive adhesive. It is both extremely flexible and durable with a very high resistance to tearing. |
| For further information or an alternative data sheet please contact us |
